Acrylic water dispersion for isolation of stains
Characteristics and purpose:
Sanikril is an acrylic primer for blockage, and/or isolation of stains which are water-soluble, such as tobacco, soot stains, stains caused by leakage or flood. Sanikril is applied onto dry and clean plastered, skimmed surfaces and gypsum cardboard panels in the interiors, both wall, and ceiling. Sanikril is not efficient if foul surfaces have previously been treated with similar agents which are not water-based. After drying, surfaces treated with Sanikril must be mandatory treated with Maxidis dispersion paint, in two coats.
Application mode:
Surfaces to be coated should be free of dust, grease, crumbly parts and old coatings. Prior to use, dilute maxikril with water in ratio 1:3 (to one part of sanikril add three parts of water). Apply by brush, roller or spray device. Drying time is 8 hours at room temperature. Wash tools with water immediately after use.
Application temperature:
From +5°c to +35°c
Consumption:
From 50 to 75g/m2, depending on substrate roughness and permeability.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.