Application mode:

Add the bag content of Rolocem to 5.0-5.5l of water, stir with hand mixer until compound be-comes homogeneous, but not too long in order to avoid generation of foam which can cause problems during application onto the surface. In case it happens, leave prepared compound for 15-20 minutes, and then carry out applying. Substrate onto which Rolocem is applied must be dry, even, hard and clean (free of grease and efflorescence). Prior to applying Rolocem, prime surfaces with Maxikril or Rologrund primer, according to manufacturer’s instruction. Apply plas-ter after drying the substratum for 24 hours. Apply Rolocem by steel plasterer’s float and finish-ing by plastic flat plasterer’s float. Prepared material must be used up within 2hours. Paint sur-faces that have been treated with Rolocem with Maxifas façade paint for exterior works, and/or Maxidis or Maxipol for interior works at earliest after three weeks. Protect freshly applied sur-faces against atmospheric impacts for minimum 24 hours. Wash tools with water immediately after use.

Application temperature:

Optimum application temperature is from +10°c to +30°c. The product must not be used at working temperatures below +5°c, as well as during the rain, fog, strong sunshine and wind.

Consumption:

Thickness 1.5mm 2mm 3mm
Furrowed 2.5kg/m2 3.1kg/m2 /
Smoothed 2.6kg/m2 3.3kg/m2

Shelf-life:

6 months in closed and undamaged package in a dry and ventilated room