Deep penetrating acrylic primer
Characteristics and purpose:
Maxikril hydrosol is a special deep penetrating acrylic coating. It is used for impregnation of highly absorbent mineral and concrete exterior and interior surfaces, as well as gypsum-cardboard panels. It is especially recommended for less hard surfaces prior to painting or prior to applying finish acrylic-based paints and decorative plasters. It penetrates deeply into substratum, makes it uniform, firm, increases its water resistance and improves adhesion of final mate-rials. Do not use maxikril hydrosol if silicate, silicone paints or silicate, silicone decorative plas-ters are applied for final works.
Application mode:
Surfaces to be coated should be load-bearing, dry, and free of dust, grease, crumbly parts and old coatings. Prior to use, dilute maxikril hydrosol with water in ratio 1:5. Apply by brush, roller or spray device. Drying time is 12 hours at room temperature. Wash tools with water immedi-ately after use.
Application temperature:
Optimum application temperature is from +10°c to +25°c. The product must not be used at workingtemperatures below +5°c, as well as during the rain, fog, strong sunshine and wind.
Consumption:
From 40 to 50g/m2 depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.