Acrylic prime coat
Characteristics and purpose:
Maxikril is acrylic aqueous dispersion, extremely water resistant. It is used for impregnation of various substrates (brick, concrete, fibrous-cement substrates, etc.), prior to application of dispersion paints and decorative façade plasters. Maxikril concentrate is easy to apply, dries fast and impregnates substrate meeting high standards. Coated surfaces are uniform, less absorbent and improve adhesion of final materials. Dry applied film is colourless. Do not use maxikril concentrate if silicate, silicone paints or silicate, silicone decorative plasters are applied for final works.
Application mode:
Surfaces to be coated should be load-bearing, dry, and free of dust, grease, crumbly parts and old coatings. Prior to use, dilute Maxikril concentrate with water in ratio 1:9. Apply by brush, roller or spray device. Drying time is 6 hours at room temperature. Wash tools with water imme-diately after use.
Application temperature:
Optimum application temperature is from +10°c to +25°c. The product must not be used at workingtemperatures below +5°c, as well as during the rain, fog, strong sunshine and wind.
Consumption:
From 20 to 30 g/m2, depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.