Application mode:

Compound preparation: stir thoroughly 25kg of gletolin s in 9l of water until homogenous clot-free compound is obtained. Leave it for 15 minutes, and again stir thoroughly. Compound is usually applied in two coats, manually, by corrosion-resistant plasterer’s float. Use up the pre-pared compound within 2 hours. Sand dry coats with emery paper. Total thickness of two coats must not be more than 3mm. Drying time for sanding, and/or for application of another coat is 8-12 hours at temperature of 200 c. Protect fresh surfaces against the rain, sunshine and wind. Thus skimmed surfaces can be painted after 14 days.

Application temperature:

From +50 c to +300 c

Consumption:

1.0 – 2.0 kg/m2, depending on substrate roughness.

Shelf-life:

6 months in closed and undamaged package in a dry and ventilated room.