Application mode:

Substrate must be dry, even, clean and free of poorly bonded parts of dust, water-soluble salts, grease and other impurities that can prevent good adhesion to substrate. Newly plastered sur-faces must be dried for 28 days, and finish coat of styrofoam glue for 7 days. Prior to application of roloakril, prime surfaces with maxikril, according to manufacturer’s instruction. We particu-larly recommend shaded rologrund in approximate shade of roloakril. Prior to use, stir thor-oughly roloakril and as such it is ready for use. Roloakril shaded in maxima mix system and roloakril of different production batches and dates must be mandatory homogenised! Homog-enisation is carried out by mixing quantity of a few containers in a larger vessel and when ho-mogenized quantity of approximately one container is used up, a new is added and mixed. Ap-ply roloakril by steel plasterer’s float and plaster finishing by plastic flat plasterer’s float. In nor-mal conditions protect freshly applied surfaces against atmospheric impacts for minimum 24 hours. If works are carried out at lower temperatures and increased humidity, drying time must be extended. Wash tools with water immediately after use.

Application temperature:

Optimum application temperature is from +10°c to +30°c, and the product must not be used at working temperatures below +5°c, as well as during the rain, fog, strong sunshine and wind.

Consumption:

Thickness 1.5mm 2mm 3mm

Furrowed 2.3kg/m2 2.9kg/m2 3.6kg/m2

Smoothed 2.9kg/m2 3.3kg/m2

Shelf-life:

12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.