Paints for interior use
Ultradis®
High-coverage – water washable paint for interior walls
Characteristics and purpose:
Ultradis is classified in high-quality i grade paints. It is environmentally friendly dispersion water washable paint for interior use, based on acrylic resin. It is characterised with high-coverage ability, resistance to dirt as well as wet wiping and washing, good adhesion to substrate, high vapour permeability, elastic resilience and hardness. It is produced in white colour and as a base for shading in maxima mix system. Ultradis can be shaded with maxi colour to pastel shades or with maxifas colour according to “paints and plasters” shade chart, as well as in Maxima mix system. It is applied in interiors onto prepared surfaces.
Application mode:
Surfaces that are being coated should be free of dust, grease, crumbly parts and old coatings. It is recommended to skim surfaces with gletolin or gletolin g. Prior to application of ultradis, prime surfaces with maxikril primer, according to manufacturer's instruction. Apply ultradis in two coats, whereat dilute the paint up to 15%, as necessary. The second coat can be applied after 6 hours depending on weather conditions, and/or onto previously dried coat. Apply by roller, brush, roller, or spray device. Wash tools with water immediately after use.
Application temperature:
From +5°c to +35°c
Consumption:
80–110ml/m2 in two coats, depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.
Maxidis® F
Fungicide paint for interior walls
Characteristics and purpose:
Maxidis F is water washable dispersion paint for interior use with significant fungicide characteristics. Maxidis F coating resolves mould problem in humid rooms such as cellar, kitchen, bathroom, etc. Maxidis F can be shaded with maxi colour or maxifas colour according to „paints and plasters“ shade chart, as well as in maxima mix system.
Application mode:
Walls that are infected must be first coated with maxicid according to manufacturer's instruction and dried for minimum 24 hours. Prior to use, maxidis f must be thoroughly stirred and, as nec-essary diluted with water from 10% to 20%. Apply by roller or brush in two coats. Apply the second coat in time interval of 6 hours, i.e. On dried first coat. In order to preserve fungicide characteristics, total dilution of maxidis f dispersion with water or toners must not exceed 20%.
Application temperature:
From +5°c to +35°c
Consumption:
0.2–0.3kg/m2 in two coats, depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.
Maxidis®
Water washable paint for interior walls
Characteristics and purpose:
Maxidis® is a quality dispersion paint for interior use. It is characterised with good adhesion to substrate, excellent coverage ability, vapour permeability, elastic resilience, hardness and resistance to wet wiping. It is intended for protection and decoration of the interior wall surfaces of concrete, flexible mortar, aerated concrete, asbestos-cement, chipboard... It is produced in white colour and as a base for shading in maxima mix system. Maxidis can be shaded with maxi colour to pastel shades or with maxifas colour according to “paints and plasters” shade chart, as well as in maxima mix system
Application mode:
Substrate onto which maxidis is applied must be hard, dry, clean and free of poorly bonded parts of dust, water-soluble salts, grease and other impurities. Remove mechanically old paint which is not well bonded, and skim uneven surfaces with gletolin or gletolin g. Prior to applying maxidis paint, impregnate walls with maxikril primer, according to manufacturer's instruction. Apply maxi-dis in two covering coats, whereat the paint can be diluted with water from 10% to 15%. The sec-ond coat, at optimum conditions, can be applied after 6 hours, and/or onto previously dried coat. Apply by brush, roller or spray device. Wash tools with water immediately after use.
Application temperature:
From +5°c to +35°c
Consumption:
0.2–0.3kg/m2 in two coats, depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.
Maxipol®
Paint for interior walls
Characteristics and purpose:
Maxipol is an eco paint for interior wall surfaces. It is characterised with high coverage ability, vapour permeability, resistance to dry wiping. It is suitable for painting any types of dry and hard substrates: fine plastered vertical and ceiling surfaces, concrete, fibrous - cement surfaces and gypsum cardboard panels. Maxipol can be shaded with maxi colour or maxifas colour according to “paints and plasters” shade chart as well as in maxima mix system.
Application mode:
Prior to application of paint, impregnate the walls with maxikril primer, according to manufacturer's instruction. Semi-dispersion is applied in two coats. For the first coat maxipol can be diluted with water up to 25%, while the second coat can be diluted up to 15%. Always apply paint onto dried surface. Apply by brush, roller or spray device. Drying time is 6 hours (condition until application of the next coat). Wash tools with water immediately after use.
Application temperature:
From +5°c to +35°c
Consumption:
0.2–0.3kg/m2 in two coats, depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.