Glues for wood & parquet
Maxikol® KP
Glue for parquet
Characteristics and purpose:
Maxikol KP is used for gluing all classic parquets and wooden prefabricated members for con-crete, wooden and similar substrates.
Application mode:
Maxikol® KP is ready-mixed for use, and should be thoroughly stirred. It is applied by drag in a coat of 1–2mm, to even, dry and smooth substrate free of grease stains, lime, dust and crumbly parts. On uneven floor parts levelling with Samoliv is required. Lay woodblocks on applied glue and press thoroughly. Further treatment of parquet, grinding and lacquering may be carried out 24 hours after gluing.
Gluing requirements:
Humidity of concrete substrate is maximum 3%, and wooden from 8% to 12%,
Relative parquet humidity: 8%-12%,
Application temperature of air, substrate and parquet should be from +5°c to +25°c,
Due to drying time, glue must be applied on surface not larger than 5–7m2 before laying par-quet.
Consumption:
From 0.8 to 1.2kg/m2, depending on substrate roughness.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.
Maxifix® D-5
Glue for hardwood
Characteristics and purpose:
Maxifix D-5 is used in furniture industry for lengthwise and crosswise jointing of softwood, espe-cially hardwood, gluing chairs, and/or anywhere where high strength of glued joints is required.
Application mode:
Gluing surface must be smooth, dry and free of dust and grease. Before use, stir glue thor-oughly, and then apply manually or mechanically.
Gluing requirements:
Pressing pressure: 0.4-0.5 mpa,
Pressing time: 120 min.
Relativna vlažnost drveta: 8%-12%,
Temperature of glue, wood and ambient must be from +18°c to +22°c,
Air humidity: 60%-70%,
Treatment of glued surfaces is possible 24 hours after the moment of gluing.
Consumption:
From 0.15 to 0.2kg/m2
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.
Maxifix® D-1
Glue for wood
Characteristics and purpose:
Maxifix d-1 is used in furniture industry, for assembly and surface gluing, in production of strip boards, for gluing chipboard, ply, etc. To wooden surfaces.
Application mode:
Before use, stir glue thoroughly, and then apply manually or mechanically. Gluing surface must be smooth, dry and free of dust and grease.
Gluing requirements:
Pressing pressure: 0.4-0.5 mpa,,
Pressing time: 120 min.
Relative wood humidity: 8%-12%,
Temperature of glue, wood and ambient must be from +18°c to +22°c,
Treatment of glued surfaces is possible 24 hours after the moment of gluing.
Consumption:
From 0.15 to 0.2kg/m2
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.